This guide will walk you through the assembly and setup of the FlexRC Ascent 3” The Ascent 3” builds upon the extreme success of the original Ascent, an innovative 2” quad with an integrated, no-hardware roll cage and fantastic flying characteristics. The single bottom plate is 3mm thick and with […]
Daily Archives: October 14, 2017
2 posts
A complete build up of a Ascent 2″ drone. Some solder tutorial, betaflight setup and esc firmware flashing. In this video I built up a custom FlexRC Ascent V2 rocket. This build consists on a HGLRC XJB 425 FC/ESC stack, HGLRC TX-20 VTX, Frsky XM+ reciever, 1105 6000 KV motors, […]