DYS 1104 motors use winding wire in the heatshrink, which is somewhat brittle and has to be handled with care to avoid unwanted damage during installation. To avoid issues: NEVER APPLY FORCE, NEVER PULL WIRES, HANDLE WITH CARE. How to shorten motor wire? Because of the nature of DYS motor […]
Monthly Archives: December 2016
3 posts
The following FlexRC Pico Core motors wiring diagram is good for Pico X, any version of Pico Owl, Mini Owl and other racing drone which uses FlexRC Pico Core. 1. Please refer to how to assemble FlexRC Pico Core. 2. If you are using DYS 1104 motors, then refer to […]
FlexRC Pico Core is very easy to assemble, just follow the steps before and your racing drone will be ready in just a few minutes. Solder battery connector to ESC Cut off red and black wires Result will look like this: Solder black and red wires to power pads Install […]