A complete build up of a Ascent 2″ drone. Some solder tutorial, betaflight setup and esc firmware flashing.
In this video I built up a custom FlexRC Ascent V2 rocket. This build consists on a HGLRC XJB 425 FC/ESC stack, HGLRC TX-20 VTX, Frsky XM+ reciever, 1105 6000 KV motors, and a RunCam Micro Swift v2 camera.
All of this is in an amazing 62g package!
Powered with Tattu 650 3s Lipo and this thing is an acrobatic, ball rippin monster!
Download FlexRC Mini Owl – Extreme Omnibus – DIY Build Instructions This guide will walk you through the detailed build steps using […]
Wiring example Here is working example of wiring FrSky receiver to Mini F3 flight controller Board layout: Battery connection In order to […]
The Ascending Family – Buying your first FlexRC Ascent frame is a lot like buying your first Pokemon card. Just one can […]
Lets say that you’ve built your quadcopter which has flight controller with Cleanflight support and DSMX satellite receiver installed and now wondering […]
2 thoughts on “Ascent v2 Video Build and Setup.”
[…] FlexRC has two build guides that you can follow if you build your quad to match one their recommended build specs. They can be found here and here. […]
[…] FlexRC has two build guides that you can follow if you build your quad to match one their recommended parts list. They can be found here and here. […]