Quite a few flight controllers are shipping with Betaflight firmware already installed. That’s fantastic for a new user as it eliminates the need to flash the firmware. With the Betaflight Configurator open, plug in a USB cable to the flight controller. Ensure you are using a USB cable that is […]
Kevin
16 posts
In order to ensure the Betaflight configurator can communicate with your flight controller, it is necessary to install two drivers on your PC. Both are linked on the Betaflight configurator welcome page. First, click on the link to CP210x Drivers and follow the instructions on that page to download […]
The Betaflight Configurator is a Google Chrome App and is available for free from the Chrome store. Install Chrome on your PC if you don’t already have it. Head to the Chrome Store at https://chrome.google.com/webstore. In the search bar in the upper left corner, type “betaflight” and hit Enter. “Betaflight […]
This guide is intended for anyone new to setting up quadcopter flight controllers using the Betaflight firmware and configurator. It is not intended as a guide for experienced users but will instead give new users instructions on the basic, bare-bones setup steps that will just get your quad up in […]
Download FlexRC Mini Owl – Extreme Omnibus – DIY Build Instructions This guide will walk you through the detailed build steps using the FlexRC Mini Owl Extreme FPV Racing Drone DIY Kit. The kit contains everything you need to build your Mini Owl except the radio receiver, which is purchased […]
Reposted from RCGroups. Just a few weeks after getting my first quad, a 5” racer, flying, I started looking into indoor micro FPV quads. Since then, I’ve built and flow…and HATED…8 different designs. But after all those disappointments, I’ve finally found one I LOVE: The FlexRC Pico Owl v2. The […]